How To Handle Multiple Conditions With TradingView Webhooks

Get The OAT Multiple Alert Conditions Indicator (Save To Favorites To Use It)

TradingView only allows one condition per alert, but with the custom OAT (Options Auto Trader) Multiple Alert Conditions indicator, you can set up to four conditions for your webhook triggers. This guide walks you through the process of setting up multiple conditions for entry and exit alerts.

Step 1: Access the Alert Settings

1. Open TradingView and navigate to your chart.

2. Click on the Alert button to create a new alert.

3. Normally, TradingView only supports a single condition per alert. To use multiple conditions, proceed with the next steps.

Step 2: Apply the OAT Multiple Alert Conditions Indicator

1. Search for OAT Multiple Alert Conditions in the TradingView indicators.

2. Add it to your chart (save to favorites).

3. Open the settings for the indicator.

4. You will see options to set up to four conditions.

Step 3: Configure Your Conditions

1. In the OAT indicator settings, set up your conditions:

   • Condition 1: Define your first requirement (e.g., Moving Average is above a certain level).

   • Condition 2: Define the second condition (e.g., Stock’s close price is above the Moving Average).

   • Condition 3 & 4 (Optional): Add more conditions as needed.

2. The chart will display numbers corresponding to each condition when they are met:

   • 1 = Condition 1 met

   • 2 = Condition 2 met

   • A blue square appears when all active conditions are met.

Step 4: Create an Alert with Multiple Conditions

1. Once your conditions are set up, go back to Alerts.

2. Under Condition, select OAT Multiple Alert Conditions.

3. Choose which conditions should trigger the alert:

   • Condition 1 only

   • Condition 2 only

   • All conditions (applies only to active conditions)

4. Adjust the alert parameters, such as expiration and webhook URL.

5. Click Create to save your alert.

Step 5: Verify and Activate Your Alert

1. Review the chart to ensure your conditions are triggering correctly.

2. If necessary, adjust the conditions in the indicator settings.

3. Once satisfied, let the alert run and trigger webhooks when conditions are met.

Additional Resources

• You can find the OAT Multiple Alert Conditions indicator on TradingView by searching "10% Credit Spreads".

• Visit the TradingView Scripts section under the Options Auto Trader account.

• Direct link to the script will be provided in the TradingView description.

• Or you can check out this link attached here: OAT Multiple Alert Conditions

For any further questions, feel free to reach out to the support team!

TERMS OF SERVICE: Please be aware that continued use of the Options Auto Trader is subject to our Terms Of Service. If you have any questions or wish to review these terms, feel free to visit the website.